WEBSITE REFERENCE / CG-13
CAST ALUMINUM GLASS ENTRANCE DOORS
A glazed entrance.
A distinct door construction.
Cast-aluminum range glazed entrance designs for villas and residences. Compare the complete entrance configuration, glazing, frame and lock for your opening.
Plan a glazed entrance ↗BEFORE YOU CHOOSE A DESIGN
Is this the right series for your opening?
Why consider it
Bring light into an entrance while coordinating glass, grille and panel design.
Construction & quotation details
What to weigh up
Privacy and visibility change with the glass; select glazing and security requirements together.
Confirm in your quotation
Glass build-up, privacy, grille, leaf and frame construction, seals, threshold and hardware.
DESIGN REFERENCES
Light, privacy and entrance character.
Choose a reference, then confirm panel construction, glazing, dimensions and hardware.
Scene & setting references
Compare the design in an architectural or interior setting.
WEBSITE REFERENCE / CG-14
Reeded-glass full-height double entrance
Enquire about this design ↗
WEBSITE REFERENCE / MG-12
Four-column glazed double entrance
Enquire about this design ↗
WEBSITE REFERENCE / MG-13
Classic glazed entrance with bright surround
Enquire about this design ↗
WEBSITE REFERENCE / MG-16
Black glazed entrance with lower panels
Enquire about this design ↗
WEBSITE REFERENCE / MG-17
Textured-glass double entrance
Enquire about this design ↗
WEBSITE REFERENCE / MG-19
Decorative glazed entrance with transom
Enquire about this design ↗
WEBSITE REFERENCE / MG-20
Geometric-transom glazed entrance
Enquire about this design ↗
WEBSITE REFERENCE / MG-25
White full-grid double entrance
Enquire about this design ↗WEBSITE REFERENCE / MG-26
Tall textured-glass double entrance
Enquire about this design ↗
WEBSITE REFERENCE / CG-01
Tall privacy-glass double entrance
Configuration notes
From the supplied cast-aluminum entrance glass-door range. Confirm the exact decorative panel, frame, glazing and full assembly with your quotation.
WEBSITE REFERENCE / CG-02
Classic grid-glass double entrance
Configuration notes
From the supplied cast-aluminum entrance glass-door range. Confirm the exact decorative panel, frame, glazing and full assembly with your quotation.
WEBSITE REFERENCE / CG-04
Grid entrance with matching glazed transom
Configuration notes
From the supplied cast-aluminum entrance glass-door range. Confirm the exact decorative panel, frame, glazing and full assembly with your quotation.
WEBSITE REFERENCE / CG-05
Reeded-glass panel double entrance
Configuration notes
From the supplied cast-aluminum entrance glass-door range. Confirm the exact decorative panel, frame, glazing and full assembly with your quotation.
WEBSITE REFERENCE / CG-06
Full-height grid entrance with transom
Configuration notes
From the supplied cast-aluminum entrance glass-door range. Confirm the exact decorative panel, frame, glazing and full assembly with your quotation.
WEBSITE REFERENCE / CG-07
Warm brown panel-and-glass double entrance
Configuration notes
From the supplied cast-aluminum entrance glass-door range. Confirm the exact decorative panel, frame, glazing and full assembly with your quotation.
WEBSITE REFERENCE / CG-08
Horizontal-light black double entrance
Configuration notes
From the supplied cast-aluminum entrance glass-door range. Confirm the exact decorative panel, frame, glazing and full assembly with your quotation.
WEBSITE REFERENCE / CA-30
Circular motif dark entrance
View catalogue parameters
- Catalogue model
- 990
- Front panel / detail
- 4 mm engraved aluminum panel
- Rear panel
- 3 mm aluminum flat panel
- Surface treatment
- Fluorocarbon coating listed in the source catalogue; confirm colour and finish sample.
- Seal material
- EPDM listed in the source catalogue.
- Overall size
- Made to order; provide opening width, height and wall thickness.
Source: ZHONGKAI 2026 entrance catalogue, page 18. Panel values are not overall door-leaf thickness. These are catalogue configurations; the selected order is confirmed in the quotation. Use the website reference as well as the catalogue model because some source model numbers repeat.
WEBSITE REFERENCE / CA-31
Curved glazed accent entrance
View catalogue parameters
- Catalogue model
- 618
- Front panel / detail
- 4 mm engraved aluminum with painted-glass detail
- Rear panel
- 4 mm engraved aluminum
- Surface treatment
- Fluorocarbon coating listed in the source catalogue; confirm colour and finish sample.
- Seal material
- EPDM listed in the source catalogue.
- Overall size
- Made to order; provide opening width, height and wall thickness.
Source: ZHONGKAI 2026 entrance catalogue, page 19. Panel values are not overall door-leaf thickness. These are catalogue configurations; the selected order is confirmed in the quotation. Use the website reference as well as the catalogue model because some source model numbers repeat.
WEBSITE REFERENCE / CA-32
Tall twin-line entrance
View catalogue parameters
- Catalogue model
- 1266
- Front panel / detail
- 4 mm engraved aluminum panel
- Rear panel
- 3 mm formed aluminum panel
- Surface treatment
- Fluorocarbon coating listed in the source catalogue; confirm colour and finish sample.
- Seal material
- EPDM listed in the source catalogue.
- Overall size
- Made to order; provide opening width, height and wall thickness.
Source: ZHONGKAI 2026 entrance catalogue, page 21. Panel values are not overall door-leaf thickness. These are catalogue configurations; the selected order is confirmed in the quotation. Use the website reference as well as the catalogue model because some source model numbers repeat.
WEBSITE REFERENCE / CA-43
Grille and panel entrance
View catalogue parameters
- Catalogue model
- 1223
- Front panel / detail
- 4 mm classic framed panel
- Rear panel
- 3 mm classic framed panel
- Surface treatment
- Fluorocarbon coating listed in the source catalogue; confirm colour and finish sample.
- Seal material
- EPDM listed in the source catalogue.
- Overall size
- Made to order; provide opening width, height and wall thickness.
Source: ZHONGKAI 2026 entrance catalogue, page 54. Panel values are not overall door-leaf thickness. These are catalogue configurations; the selected order is confirmed in the quotation. Use the website reference as well as the catalogue model because some source model numbers repeat.
WEBSITE REFERENCE / CA-44
Glazed classic double entrance
View catalogue parameters
- Catalogue model
- 137
- Front panel / detail
- 3 mm classic framed panel
- Rear panel
- 3 mm classic framed panel
- Surface treatment
- Fluorocarbon coating listed in the source catalogue; confirm colour and finish sample.
- Seal material
- EPDM listed in the source catalogue.
- Overall size
- Made to order; provide opening width, height and wall thickness.
Source: ZHONGKAI 2026 entrance catalogue, page 60. Panel values are not overall door-leaf thickness. These are catalogue configurations; the selected order is confirmed in the quotation. Use the website reference as well as the catalogue model because some source model numbers repeat.
WEBSITE REFERENCE / CA-45
Arched glazed panel entrance
View catalogue parameters
- Catalogue model
- 630
- Front panel / detail
- 4 mm classic framed panel
- Rear panel
- 4 mm classic framed panel
- Surface treatment
- Fluorocarbon coating listed in the source catalogue; confirm colour and finish sample.
- Seal material
- EPDM listed in the source catalogue.
- Overall size
- Made to order; provide opening width, height and wall thickness.
Source: ZHONGKAI 2026 entrance catalogue, page 61. Panel values are not overall door-leaf thickness. These are catalogue configurations; the selected order is confirmed in the quotation. Use the website reference as well as the catalogue model because some source model numbers repeat.
WEBSITE REFERENCE / CA-46
Arched transom double entrance
View catalogue parameters
- Catalogue model
- 797
- Front panel / detail
- 3 mm classic framed panel
- Rear panel
- 3 mm classic framed panel
- Surface treatment
- Fluorocarbon coating listed in the source catalogue; confirm colour and finish sample.
- Seal material
- EPDM listed in the source catalogue.
- Overall size
- Made to order; provide opening width, height and wall thickness.
Source: ZHONGKAI 2026 entrance catalogue, page 64. Panel values are not overall door-leaf thickness. These are catalogue configurations; the selected order is confirmed in the quotation. Use the website reference as well as the catalogue model because some source model numbers repeat.
WEBSITE REFERENCE / CA-47
Decorative grille double entrance
View catalogue parameters
- Catalogue model
- 1771
- Front panel / detail
- 6 mm classic framed panel
- Rear panel
- 6 mm classic framed panel
- Surface treatment
- Fluorocarbon coating listed in the source catalogue; confirm colour and finish sample.
- Seal material
- EPDM listed in the source catalogue.
- Overall size
- Made to order; provide opening width, height and wall thickness.
Source: ZHONGKAI 2026 entrance catalogue, page 67. Panel values are not overall door-leaf thickness. These are catalogue configurations; the selected order is confirmed in the quotation. Use the website reference as well as the catalogue model because some source model numbers repeat.
WEBSITE REFERENCE / CA-55
Tall lattice transom entrance
View catalogue parameters
- Catalogue model
- A23
- Front panel / detail
- 4 mm engraved aluminum panel
- Rear panel
- 4 mm engraved aluminum panel
- Surface treatment
- Fluorocarbon coating listed in the source catalogue; confirm colour and finish sample.
- Seal material
- EPDM listed in the source catalogue.
- Overall size
- Made to order; provide opening width, height and wall thickness.
Source: ZHONGKAI 2026 entrance catalogue, page 87. Panel values are not overall door-leaf thickness. These are catalogue configurations; the selected order is confirmed in the quotation. Use the website reference as well as the catalogue model because some source model numbers repeat.
WEBSITE REFERENCE / CA-59
Inset-window pivot entrance
View catalogue parameters
- Catalogue model
- A11
- Front panel / detail
- 4 mm panel, material to be confirmed
- Rear panel
- 4 mm panel, material to be confirmed
- Surface treatment
- Fluorocarbon coating listed in the source catalogue; confirm colour and finish sample.
- Seal material
- EPDM listed in the source catalogue.
- Overall size
- Made to order; provide opening width, height and wall thickness.
Source: ZHONGKAI 2026 entrance catalogue, page 118. Panel values are not overall door-leaf thickness. These are catalogue configurations; the selected order is confirmed in the quotation. Use the website reference as well as the catalogue model because some source model numbers repeat.
WEBSITE REFERENCE / CA-60
Wide pivot with gold accent
View catalogue parameters
- Catalogue model
- 1031
- Front panel / detail
- 10 mm panel, material to be confirmed
- Rear panel
- 4 mm panel, material to be confirmed
- Surface treatment
- Fluorocarbon coating listed in the source catalogue; confirm colour and finish sample.
- Seal material
- EPDM listed in the source catalogue.
- Overall size
- Made to order; provide opening width, height and wall thickness.
Source: ZHONGKAI 2026 entrance catalogue, page 122. Panel values are not overall door-leaf thickness. These are catalogue configurations; the selected order is confirmed in the quotation. Use the website reference as well as the catalogue model because some source model numbers repeat.
WEBSITE REFERENCE / AG-01
Cast aluminum glazed double entrance door
Cast aluminum with glazing · Villa and residential main entrances. Reference AG-01 retained for enquiry continuity.
Enquire about this design ↗Product front views
Compare the door or panel arrangement with a consistent product frame. Enlarge to view the full original image.
WEBSITE REFERENCE / CG-09
Tall clear-glazed double entrance
Enquire about this design ↗
WEBSITE REFERENCE / CG-10
Decorative patterned-glass double entrance
Enquire about this design ↗
WEBSITE REFERENCE / CG-11
Reeded-glass classic double entrance
Enquire about this design ↗
WEBSITE REFERENCE / CG-03
Glazed double entrance opening reference
Configuration notes
From the supplied cast-aluminum entrance glass-door range. Confirm the exact decorative panel, frame, glazing and full assembly with your quotation.
WEBSITE REFERENCE / CA-22
Classic glazed double entrance
Enquire about this design ↗Specify the entrance assembly.
Confirm the decorative face, leaf core, door frame, glass type, seals, threshold and locking arrangement. The exact casting or panel construction is agreed for the selected design. Images alone do not establish security, thermal or fire performance.
For aluminum-profile folding glass systems, explore the separate collection ↗YOUR NEXT STEP
Plan your order.
CUSTOM SIZES · BESPOKE & BULK ORDERS
Your design.
Your specification.
Share your preferred design, opening and quantity. We can help complete the remaining details.
Request my quotationWHAT SHAPES YOUR QUOTATION
- Opening size
- Design & material
- Colour & finish
- Hardware
- Quantity
Your quotation confirms the configuration, included components and purchasing terms.
COLOUR & FINISH
Agree the finish in your hand.
Specify any RAL code or a custom colour to match. The 12 examples in our guide are starting points, not a limit.
Screen colours are illustrative. Approve the physical sample, sheen and texture before production.
Plan colour & sample approval ↗
TAKE THE DESIGNS WITH YOU
Premium entrance designs
Copper, cast aluminum & glazed entrances.
Download PDF134 design references with enquiry links.
QUESTIONS FOR THIS COLLECTION
Before you request a quotation.
How do I balance daylight and privacy?
Compare the glazed area, grille layout and glass appearance. Discuss clear, patterned or other privacy glazing, then confirm the actual glass build-up and required performance for the selected entrance.
Is this the same as an aluminum-profile folding door?
No. These are glazed entrance designs in the cast-aluminum range. Profile-framed hinged and folding systems have their own collection and must be specified separately.
Can I change the leaf arrangement or add side panels?
Send a labelled opening sketch and your preferred arrangement. Panel construction, glass, frame, hardware and feasible dimensions are reviewed for your selected design.
Complete your door package.
Interior wooden doors ↗Aluminum-profile glass doors ↗Hardware & accessories ↗Discuss multiple categories ↗LET’S PLAN YOUR DOORS
Tell us what you are building.
Start with your door type, opening dimensions, quantity and destination. We will help define the next step.